AULEKTRO®
Cover lenses - standard
Description
Cover plates should be installed, facing the welding operation, as protection against contamination. Cover plates must be replaced often due to the greater contamination during welding.
Protective welding lenses must always be protected by cover plates during overhead welding work.
Proof of performance
The cover plates produced have a very low dioptric effect, outstanding surface finish, high transmission values within the spectral range and a low mass.
Product range
Cover plates are produced in the same dimensions as SGG AULEKTRO® protective welding lenses.
Other formats and 3 mm and 4mm thicknesses are also available on request.
| Aulektro® Lens Protect |
| Available in the following dimensions: (in 1,0 und 1,5 mm thick) |
| 50 x 105 mm |
| 51 x 108 mm |
| 60 x 110 mm |
| 75 x 98 mm |
| 86 x 110 mm |
| 90 x 110 mm |
| 97 x 110 mm |
| 114 x 133 mm |
| 2 x 4 1/4 inch |
| 4 1/2 x 5 1/4 inch |
| Ø 50 mm |
Safety glass
Thermally hardened cover lenses are available from 3 mm (including silvered)
The laminated safety glass protects due to its safety properties and is now also available in 4 mm thickness. (STADIP 22.2)
Use limits
Cover l may only be used in combination with protective welding lenses for welding operations. Direct unprotected looking into the welding in die radiation or only through the cover lenses should always be avoided.
